Home | Tutorials | Wiki | Issues
Ask Your Question
0

Delta arm SDF erratic movement [closed]

asked 2019-05-25 01:27:45 -0500

cmon gravatar image

Hi, I've made the sdf for a delta arm using points from CAD. It loads correctly and the joints should be placed perfectly but when I start the simulation it moves about erratically.

The sdf file is here https://pastebin.com/YWgYFPXw . The top three joints are revolute. The middle three and bottom three are universal (The axi are shown in the first image)

The starting position: image description

Then after starting simulation and waiting for the robot to come to rest it ends up like this:

image description

I assume this is from improper joint alignment so I tried making the middle three joints ball joints to remove alignment problems there. This did not work, the ball joints acted as fixed joints.

Has anyone managed to get delta arm simulation right? Do you have ideas for me to try?

edit retag flag offensive reopen merge delete

Closed for the following reason the question is answered, right answer was accepted by cmon
close date 2019-05-28 14:40:58.954176

1 Answer

Sort by ยป oldest newest most voted
0

answered 2019-05-28 14:40:44 -0500

cmon gravatar image

After removing most joints and adding them one by one I found a misaligned joint.

edit flag offensive delete link more

Question Tools

2 followers

Stats

Asked: 2019-05-25 01:24:14 -0500

Seen: 54 times

Last updated: May 28