Gazebo | Ignition | Community
Ask Your Question

Sticky Objects? PR2 Simulation, objects stick to gripper

asked 2013-03-08 15:14:28 -0600

TomTUM gravatar image

I have troubles with gazebo models that stick to the PR2 gripper. The robot pushes objects with the gripper, not using the gripper for grasping but just to push. When the gripper is retracted, the objects that were pushed away are pulled back with the gripper again, as if there was glue between the gripper and the object.

Can this behavior be adjusted via the SurfaceParameters ?

Any other thoughts?

Thank you!


edit retag flag offensive close merge delete

1 Answer

Sort by ยป oldest newest most voted

answered 2013-03-08 15:23:50 -0600

hsu gravatar image

You can try and play around with the parameters, in general, reduce interpenetration by increasing stiffness (changing kp and kd), increasing maxVel or reducing minDepth for the gripper might help. A large part of the reason might be because the trimesh-trimesh contact is generating bad collision points/joints, replacing gripper pads with simple box rectangles might help (ticketed).

edit flag offensive delete link more
Login/Signup to Answer

Question Tools


Asked: 2013-03-08 15:14:28 -0600

Seen: 1,036 times

Last updated: Mar 08 '13